Sampler Parts

Silicone rubber pump tubing, quantity 5.  Tubing includes light blue locating bands, length is 32.25 inches.  Used on the 4700, 5800, 6700 Series, Avalanche® and BLZZRD™ Samplers.  Specially formulated to resist...

Silicone rubber tubing, 10 ft. roll.  This is the exact same tubing previously sold individually with black locating bands.  It serves dual purpose roles: Used as pump tubing on the...

Standard polypropylene strainer, 3/8 inch I.D.  Includes stainless steel weight on one end.  For routine and priority pollutant sampling applications. Strainer Dimensions:  Overall Length:  11.5 InchesMain Body Length:  10.5 InchesInside Diameter: ...

Silicone rubber tubing, 50 ft. roll.  This is the exact same tubing previously sold individually with black locating bands. It serves dual purpose roles: Used as pump tubing on the 3700 Series, GLS and Glacier®...

Vinyl suction line, 3/8 inch I.D. x 100 Ft.  Includes one tubing coupler.   Does not include a strainer. Suitable for PFAS sampling.  Read more here. Suction Line Specifications:Inside Diameter:  0.375 InchesOutside...

Low flow stainless steel strainer, 3/8 inch I.D.  For applications with low flows. Strainer Dimensions:  Overall Length:  7.00 InchesMain Body Length:  6.00 InchesInside Diameter:  0.375 InchOutside Diameter:  0.562 Inch Note:  This...

Temperature sensor wiring assembly used on Model 4700 or 5800 Sampler.  Includes both air and evaporator sensors.  This part replaces part number 694704054 on 4700 Samplers. Estimated Shipment Time (After Receipt...

Stainless steel double junction combination pH probe with built-in exposed temperature probe and 25 ft. (7.62 m) cable.   This product does not include a warranty. Note:  This also serves as...

Replacement pump assembly for Model 5800 Sampler.  Also for Model 4700 Sampler with Serial Number 207K01237 and later.  Ready to install. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Desiccant, 16 oz. bottle.  Loose yellow / orange silica gel beads (2 to 5 mm), which turn green when saturated.  Used in 2100 Series Module desiccant tubes, 4200 Series Flowmeters,...

Vinyl suction line with standard weighted polypropylene strainer, 3/8 inch I.D. x 25 Ft.  Includes tubing coupler.  Suction Line Specifications:Inside Diameter:  0.375 InchesOutside Diameter:  0.563 InchesLength:  25 FeetIncludes Tubing Coupler: ...

Tubing coupler, 3/8 inch I.D.  Clampless, one-piece coupler manufactured of stainless steel.  Can be used with any ISCO sampler.  For use with vinyl suction line only. Estimated Shipment Time (After...

Composite ProPak™ bags, quantity 100.  Capacity of each bag is 2 Gallons (7.5 Liters).  Manufactured of low-density polyethylene (LDPE). Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Vinyl suction line, 3/8 inch I.D. x 500 Ft.  Includes two tubing couplers. Does not include a strainer. Suitable for PFAS sampling.  Read more here. Suction Line Specifications:Inside Diameter:  0.375 InchesOutside...

Multipurpose cable with 16 unterminated leads, 10 ft. (3 m) long.  Includes instruction sheet.  Compatible with: Model 4700 Refrigerated Sampler Model 5800 Refrigerated Sampler Estimated Shipment Time (After Receipt of...

Replacement refrigeration assembly for the Models 4700 or 5800 Refrigerated Samplers, 117 VAC. This item is provided with a 2-year limited warranty. Note:  This item replaced part number 604704028. Estimated...

Polyethylene round bottle with two caps, 2.5 Gallon (9.5 Liter) capacity.  Includes two caps - one solid cap, the other modified with a hole to properly route the discharge tube during...

Low flow stainless steel strainer, 1/4 inch I.D.  For applications with low flows. Strainer Dimensions:  Overall Length:  7.00 InchesMain Body Length:  6.00 InchesInside Diameter:  0.250 InchOutside Diameter:  0.375 Inch Note:  This...

Glass bottle with PTFE-lined cap and bale, 2.5 Gallon (9.5 Liter) capacity. Bottle Dimensions: Height:  13.00 Inches (33.02 cm)Outside Diameter:  8.85 Inches (22.50 cm)Throat:  5.12 Inches (13.02 cm) Note:  This bottle...

PTFE suction line with protective jacket, 3/8 Inch I.D. x 25 Ft.  Consists of a thin PTFE layer surrounded by a polyethylene outer jacket.   Does not include a strainer. Suction...