Flowmeter Accessories

Model 934 Nickel-Cadmium Battery.  Rechargeable, 12 VDC, 4 Amp-hours.  For use with ISCO GLS, 3700 & 6700 Series Portable Samplers and 4200 Series Flowmeters.  Recharge the 934 battery using a...

Model 913 High Capacity Power Pack.  Converts 120 VAC to 12 VDC.  Includes separate port for charging ISCO Model 934 Nickel Cadmium Batteries.  For use with GLS, 3700/6700 Series Portable...

Model 961 Battery Charger, powered by 120 VAC, 60 Hz.  For charging ISCO 934 Nickel Cadmium Batteries, one at a time. Input Voltage:  120 VAC @ 60 HzOutput Voltage:  14.5...

External 12 VDC connect cable, 6 ft.  For powering portable ISCO Sampler or Flowmeter from an external 12 VDC source such as an automotive or deep cycle marine battery.  Terminates...

Model 946 Lead-Acid Battery.  Rechargeable, 12 VDC, 6.5 Amp-hours.  For use with ISCO GLS, 3700 & 6700 Series Portable Samplers, 4200 Series Flowmeters and Signature Portable Flowmeters.  Recharge the 946...

USB communication cable, 10 ft. (3 m).  Connects 2100 Series Module top connector to PC with USB connector. Note:  This replaced part number 602004046. Estimated Shipment Time: 12-16 Days

ISCO Sampler to ISCO Flowmeter connect cable, 25 ft. (7.6 m).  For use with older ISCO flowmeters.  Not for use with the Model 5800 Sampler or 2100 Series Modules. Note: ...

TIENet® 308 Analog 4-20 mA Output Option Card, two independent channels.  Provides an analog output signal proportional to a configured measurement input.  Up to three cards may be installed in...

Vinyl bubble line, 1/8 inch I.D. x 100 Ft. (30.4 m).  For use with bubbler flowmeters/modules. Note:  This item replaced part numbers: 601873044601873051605304706 Estimated Shipment Time:  12-16 Days

USB cable, 3 In. (75 mm).  USB Micro A to USB A for Flash Drive connection to Signature® meter. Estimated Shipment Time: 5-9 Days

Signature® desiccator assembly with desiccant and hydrophobic filter. Estimated Shipment Time: 12-16 Days

Flowlink LE Software, single user license. For retrieving measurement, parameter, and sample data from ISCO 2100 Series Modules, Signature flowmeters, Pulsed Doppler flowmeters, 6700 Series/Avalanche Samplers, 676 and 677 Logging...

Ethernet communication module for Signature® meter.  Provides RJ45 connection to support Ethernet communications.  Remote setup and data retrieval, alarm output configuration via TCP/IP communication protocol with a static address, using...

TIENet® 304 Contact Output Option Card, two isolated independent Form "C" relay circuits.  Card closes or opens relays at specific thresholds set within the Signature programming.  Up to three cards may...

TIENet™ 306 sampler interface cable, 32 ft. (10 m).  For permanent Signature meter.  Includes one TIENet™ cord grip fitting for watertight connection to the Signature meter in non-conduit applications.  Connects...

Stainless steel bubble tube - 4 ft. (1.21 m) length.  For use with 1/8 inch I.D. vinyl bubble line. Estimated Shipment Time: 12-16 Days

Teledyne ISCO Open Channel Flow Measurement Handbook is a valuable resource for those involved with flow measurement applications. This new eighth edition combines material from many sources, providing information on...

Model 965 Five Station Battery Charger.  Powered by 120/240 VAC, 50/60 Hz (user-selectable).  North America power cord included.  Charges five ISCO 934 Nickel Cadmium Batteries or five 946/947 Lead Acid...

Low profile area velocity sensor, measures 10 ft. (3.04 m) level range.  Includes 25 ft. (7.62 m) of cable. Sensor Dimensions:Length:  6.00 Inches (15.2 cm)Width:    1.3 Inches (3.3 cm)Height: ...

Submerged probe level sensor only, measures 10 ft. (3 m) level range.  Includes 25 ft. (7.6 m) of cable. Sensor Dimensions:Length:  9.5 Inches (24.1 cm)Diameter:  0.875 Inches (2.2 cm) Estimated...