Aqueous Seal for 100DX / 100DMSKU: 202909077
Aqueous seal for Models 100DM and 100DX Syringe Pumps. White-translucent, ultra-high molecular weight polyethylene. Maximum pressure rating 7,500 psi (517.1 bar). This seal has better wetting properties, which makes it a good choice...
$ 15070 $ 150.70
Calibrated Preamplifier Assembly for 65DM / 100DM / 100DX / 260DSKU: 601244235
Calibrated preamplifier assembly (a/k/a pressure transducer) for Models 65DM, 100DM, 100DX and 260D Syringe Pumps.
$ 3,97827 $ 3,978.27
Circuit Board Assembly for Syringe Pump Motor Drive Unit for 100DXSKU: 601245159
Circuit board assembly for the Model 100DX Syringe Pump motor drive unit. Pump identification chip programmed.
$ 1,49025 $ 1,490.25
Combination Gear (all models)SKU: 691243800
Combination gear for all models of Teledyne ISCO Syringe Pumps.
$ 45046 $ 450.46
Cylinder Cap Seal for 65DM / 100DM / 100DX / 100HLfSKU: 691243465
Cylinder cap seal for Models 65DM, 100DM, 100DX and 100HLf Syringe Pumps.
$ 4434 $ 44.34
Extended Worm Gear (see description for models)SKU: 691243563
Extended worm gear for Models 30D, 65D, 65DM, 65HP, 65x, 100DX, 100HLf, 100HLx, 260D, 260HL, 260HLf, 260HP, 260HPVC, 500D, 500HL, 500HLf, 500HP, 500HPx, 500HV, 1000D, 1000HL, 1000HLf and 1000x Syringe...
$ 24041 $ 240.41
Failsafe Reverse Brake, 24V (all models)SKU: 150000601
Failsafe reverse brake, 24 volt coil, 0.250 Inch bore. Used on all Teledyne ISCO Syringe Pumps.
$ 23573 $ 235.73
Flanged Radial Ball Bearing (see description for models)SKU: 201032900
Flanged radial ball bearing, 0.3750 Inch I.D. x 0.8750 Inch O.D., 0.281 Inch wide. Used on Models 65D, 65DM, 65HP, 100DM, 100DX, 500D, 500DX, 500HP, 1000D and 1000x Syringe Pumps. Plain...
$ 2917 $ 29.17
Flanged Radial Ball Bearing (see description for models)SKU: 201133700
Flanged radial ball bearing, 0.3750 Inch I.D. x 0.8750 Inch O.D., 0.281 Inch wide. Used on Models 30D, 65D, 65DM, 65HP, 100DM, 100DX, 260D, 260HP, 260 HPVC, 260x, 500D, 500DX, 500HP, 500...
$ 5485 $ 54.85
Fuse (1 Amp)SKU: 411031151
Fuse 3AG 250 volt 1 amp slo-blo.
$ 350 $ 3.50
Fuse (2 Amp)SKU: 411031162
Fuse 3AG 250 volt 2 amp, slo-blo.
Gear LubricantSKU: 601244220
Gear Lubricant for all Teledyne ISCO syringe pumps.
$ 5368 $ 53.68
Hastelloy Piston Assembly for 100DM / 100DXSKU: 601244315
Hastelloy piston assembly for Models 100DM and 100DX Syringe Pumps.
$ 2,31064 $ 2,310.64
Hastelloy Piston Base for 100DM / 100DX / 100HLSKU: 691243753
Hastelloy piston base for Models 100DM, 100DX, and 100HL Syringe Pumps.
$ 1,18239 $ 1,182.39
Hastelloy Piston Seal Retainer for 100DM / 100DX / 100HLSKU: 691243754
Hastelloy piston seal retainer for Models 100DM, 100DX and 100HL Syringe Pumps.
$ 50420 $ 504.20
High Pressure Stainless Steel Plug, 1/8 inch (see description for models)SKU: 209016680
High pressure stainless steel plug, 1/8 inch. Used on Models 65DM, 100DM, 100DX, 100HLf, 260D, 260HLf, and 500D Syringe Pumps.
$ 5135 $ 51.35
High Temperature Seal for 100DM / 100DX / 100HLxSKU: 202909076
High temperature seal for Models 100DM, 100DX and 100HLx Syringe Pumps. Black, PTFE graphite fiber reinforced high temperature compound. This seal is best suited for applications which require temperatures between 50°C and...
$ 14300 $ 143.00
Low Pressure Seal for 100DM / 100DXSKU: 202909275
Low pressure seal for Models 100DM and 100DX Syringe Pumps. Black, PTFE graphite filled, single point contact. Maximum pressure rating 2,000 psi (137.9 bar). This seal may provide better sealing at lower...
$ 13530 $ 135.30
Lube Wheel Assembly (see description for models)SKU: 601244236
Lube wheel assembly. Used on Models 30D, 65D, 65DM, 65HP, 100DM, 100DX, 260D, 260x, 500D, 500DX, 500HP, 1000D and 1000x Syringe Pumps.
$ 18088 $ 180.88
Lubrication Kit (all models)SKU: 601244271
Lubrication kit for all Teledyne ISCO Syringe Pumps.
$ 11087 $ 110.87
