Repair Parts (BLZZRD)

Replacement Controller Mounting Center Section Kit for BLZZRD™ Sampler. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Distributor arm used on the Avalanche® and BLZZRD® Portable Refrigerated Samplers.  A distributor arm nut is required to hold the distributor arm in place.  Estimated Shipment Time (After Receipt of Order):  7...

Distributor arm nut used on the Models 4700, 5800, 6712, 6712C, 6712FR, Avalanche and BLZZRD Samplers.  Used to hold distributor arm in place. Estimated Shipment Time (After Receipt of Order): ...

Set of 14 wedge shaped polypropylene bottles with caps, 950 mL capacity.  Used on the Avalanche® and BLZZRD® Portable Refrigerated Samplers. Bottle Dimensions:Height:  12.50 Inches (31.75 cm) Note:  This item...

Bottle cap used on the 950 mL polypropylene bottle.  White 45 mm ribbed cap, urethane liner with polyethylene skin. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Replacement lid and liner assembly.  Used on the 2.5 Gallon glass bottle. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Set of 8 round glass bottles with PTFE-lined caps, 1.8 Liter (0.5 gallon) capacity. Bottle Dimensions:Height:  8.37 Inches (21.27 cm)Outside Diameter:  4.74 Inches (12.06 cm)Throat:  2.79 Inches (7.11 cm) Estimated...

Composite tube guide. Compatible with: Model 6700 Full Size Portable Sampler Model 6700C Compact Portable Sampler Model 6712 Full Size Portable Sampler Model 6712C Compact Portable Sampler Avalanche® Portable Refrigerated...

Glass bottle with PTFE-lined cap and bale, 2.5 Gallon (9.5 Liter) capacity. Bottle Dimensions: Height:  13.00 Inches (33.02 cm)Outside Diameter:  8.85 Inches (22.50 cm)Throat:  5.12 Inches (13.02 cm) Note:  This bottle...

Polyethylene round bottle with two caps, 2.5 Gallon (9.5 Liter) capacity.  Includes two caps - one solid cap, the other modified with a hole to properly route the discharge tube during...

Bottle cap used on 2.5 Gallon polyethylene bottle. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Replacement Case Top Kit for the BLZZRD™ Sampler.  Includes the following: Controller top case O-ring (0.612 Inch I.D., 0.103 cross section) O-ring (0.612 Inch I.D., 0.862 cross section) Wiring harness,...

Replacement Controller Case Bottom Kit for BLZZRD™ Sampler.   Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Replacement pump cover kit for the Models 6712, 6712C, 6712FR, Avalanche® and BLZZRD™ Samplers.  Includes the following: Lid assembly for liquid detector* Pump cover assembly Pump housing band assembly Hinge...

Light duty draw latch, without keeper.  Compatible with the pump case on: Model 5800 Sampler Model 6712FR Fiberglass Refrigerated Sampler Avalanche® Portable Refrigerated Sampler BLZZRD® Portable Refrigerated Sampler Estimated Shipment...

Replacement dust cap kit for the Models 6712, 6712C, 6712FR, Avalanche® and BLZZRD™ Samplers.  Includes the following: Connector cap strap (3 each) Medium connector protector cap (3 each) Medium connector...

Replacement pump shaft bushing and seals kit for the 6700 Series, Avalanche® and BLZZRD™ Samplers.  Includes the following: Pump bushing Seal (0.375 Inch I.D. x 0.750 Inch O.D.), 2 each...

Replacement Pump Roller Replacement Kit for the Models 6700, 6700C, 6700FR. 6712, 6712C, 6712FR, Avalanche® and BLZZRD™ Samplers.  Consists of the following: Pump roller assembly Appropriate screw and nut Estimated...

Replacement pump gear case kit for 6712, 6712C, 6712FR, Avalanche® and BLZZRD™ Samplers.  Includes the following: Pump gear case assembly Appropriate screws and washers Desiccant, 8 oz. bag Snap button...

Replacement pump gear and plates kit for the 6700 Series, Avalanche® and BLZZRD™ Samplers.  Includes the following: Gear assembly Shaft bushing subassembly Motor mounting plate assembly Pump mounting plate assembly...