Gears & Driveline Parts (500x)

Shear Key.  Compatible with: Model 65D Syringe Pump Model 65HP Syringe Pump Model 260D Syringe Pump Model 260HL Syringe Pump Model 260HLf Syringe Pump Model 260HP Syringe Pump Model 260HPVC...

Flanged radial ball bearing, 0.3750 Inch I.D. x 0.8750 Inch O.D., 0.281 Inch wide.  Double shielded 440-C, stainless steel, ABEC 3 tolerance. Compatible with: Model 30D Syringe Pump Model 65D Syringe...

Flanged radial ball bearing, 0.3750 Inch I.D. x 0.8750 Inch O.D., 0.281 Inch wide.  Plain cylindrical bearing 0.3543 Inch (8.99 mm) bore, 1.0236 Inch (25.99 mm) O.D., 0.3150 Inch (8.00 mm)...

Ball screw assembly. Compatible with: Model 260D Syringe Pump Model 260HLf Syringe Pump Model 260HP Syringe Pump SyriXus® 260x Syringe Pump Model 500D Syringe Pump Model 500HLf Syringe Pump Model...

Failsafe reverse brake, 24 volt coil, 0.250 Inch bore.  Used on all Teledyne ISCO Syringe Pumps. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Bearing cover plate.  Manufactured of aluminum. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Stop ring used on Model 500D Syringe Pump.  Manufactured of aluminum. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Combination gear for all models of Teledyne ISCO Syringe Pumps. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Spur gear, 50 teeth at 20 pitch.  Used on all Teledyne ISCO Syringe Pumps. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Pinion Gear 14 Tooth 24 Pitch.  Compatible with: Model 65D Syringe Pump Model 65DM Syringe Pump Model 65HP Syringe Pump Model 100DM Syringe Pump Model 100DX Syringe Pump Model 260D...

Extended worm gear.  Compatible with: Model 30D Syringe Pump Model 65D Syringe Pump Model 65DM Syringe Pump Model 65HP Syringe Pump Model 100DX Syringe Pump Model 100HLf Syringe Pump Model...

Worm gear.  Manufactured of bronze.  Compatible with: Model 65D Syringe Pump Model 65DM Syringe Pump Model 65HP Syringe Pump Model 100DX Syringe Pump Model 100HLf Syringe Pump Model 100HLx Syringe...

Thrust ball bearing, 35 mm I.D. x 72 mm O.D. x 34 mm wide, 40 degree contact angle.  Two required per pump. Estimated Shipment Time (After Receipt of Order):  7...

Slide thrust bearing, 0.500 inch O.D.  Manufactured of bronze. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Ball nut assembly. Estimated Shipment Time (After Receipt of Order):  7 Day(s)

Push tube sub-assembly.  Manufactured of stainless steel.  Compatible with: Model 260D Syringe Pump Model 500D Syringe Pump Model 1000D Syringe Pump SyriXus® 260x Syringe Pump SyriXus® 500D Syringe Pump SyriXus®...